Ipv6 Nd Ra Interval; Ipv6 Nd Ra No-Advlinkmtu - HP 6125G Command Reference Manual

ipv6 nd ra interval

Syntax
ipv6 nd ra interval max-interval-value min-interval-value
undo ipv6 nd ra interval
View
Interface view
Default level
2: System level
Parameters
max-interval-value: Specifies the maximum interval for advertising RA messages in seconds, in the range
of 4 to 1800.
min-interval-value: Specifies the minimum interval for advertising RA messages in seconds, in the range
of 3 to 1350.
Description
Use ipv6 nd ra interval to set the maximum and minimum intervals for advertising RA messages. The
device advertises RA messages at intervals of a random value between the maximum interval and the
minimum interval.
Use undo ipv6 nd ra interval to restore the default.
By default, the maximum interval between RA messages is 600 seconds, and the minimum interval is
200 seconds.
The minimum interval should be three-fourths of the maximum interval or less.
The maximum interval for sending RA messages should be less than or equal to the router lifetime in RA
messages.
Examples
# Set the maximum interval for advertising RA messages to 1,000 seconds and the minimum interval to
700 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra interval 1000 700

ipv6 nd ra no-advlinkmtu

Syntax
ipv6 nd ra no-advlinkmtu
undo ipv6 nd ra no-advlinkmtu
View
Interface view
Default level
2: System level
132