Reset Ipv6 Neighbors - HP 6125G Command Reference Manual

Default level
2: System level
Parameters
None
Description
Use ipv6 unreachables enable to enable sending of ICMPv6 destination unreachable packets.
Use undo ipv6 unreachables to disable sending of ICMPv6 destination unreachable packets.
By default, sending of ICMPv6 destination unreachable packets is disabled.
Examples
# Enable sending of ICMPv6 destination unreachable packets.
<Sysname> system-view
[Sysname] ipv6 unreachables enable

reset ipv6 neighbors

Syntax
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | slot slot-number |
static }
View
User view
Default level
2: System level
Parameters
all: Clears static and dynamic neighbor information on all interfaces.
dynamic: Clears dynamic neighbor information on all interfaces.
interface interface-type interface-number: Clears dynamic neighbor information on a specified interface.
slot slot-number: Clears the dynamic neighbor information on a specified IRF member switch. The
slot-number argument specifies the ID of an IRF member switch. The value range for the argument
depends on the number of member switches and their member IDs in the IRF fabric, which you can
display with the display irf command. On a standalone device, the slot-number argument specifies the ID
of the device.
static: Clears static neighbor information on all interfaces.
Description
Use reset ipv6 neighbors to clear IPv6 neighbor information.
You can use the display ipv6 neighbors command to display the current IPv6 neighbor information.
Examples
# Clear neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors all
# Clear dynamic neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors dynamic
138