Troubleshooting Ssh, Sftp, And Scp Operations - HP ProCurve 6120G/XG Configuration Manual

Procurve series 6120 blade switches management and configuration guide
Hide thumbs Also See for ProCurve 6120G/XG:
Table of Contents

Advertisement

File Transfers
Downloading Switch Software
Once you have configured your switch to enable secure file transfers with SCP
and SFTP, files can be copied to or from the switch in a secure (encrypted)
environment and TFTP is no longer necessary.

Troubleshooting SSH, SFTP, and SCP Operations

You can verify secure file transfer operations by checking the switch's event
log, or by viewing the error messages sent by the switch that most SCP and
SFTP clients will print out on their console.
N o t e
Messages that are sent by the switch to the client depend on the client software
in use to display them on the user console.
Broken SSH Connection. If an ssh connection is broken at the wrong
moment (for instance, the link goes away or spanning tree brings down the
link), a fatal exception would occur on the switch. If this happens, the switch
will gracefully exit the session and produce an event log message indicating
the cause of failure. The following three examples show the error messages
that may appear in the log depending on the type of session that is running
(SSH, SCP, or SFTP).
A-18
|
authorized_keys
\---oper_keys
authorized_keys
When using SFTP to copy a software image onto the switch, the command
return takes only a few seconds. However, this does not mean that the
transfer is complete, because the switch requires additional time (typi­
cally more than one minute) to write the image to flash in the background.
To verify the file transfer has been completed, you can use the show flash
command or look for a confirmation message in the log as in the following
example:
I 01/09/09 16:17:07 00150 update: Primary Image
updated.
ssh: read error Bad file number, session aborted I 01/
01/90 00:06:11 00636 ssh: sftp session from
::ffff:10.0.12.35 W 01/01/90 00:06:26 00641 ssh:
sftp read error Bad file number, session aborted I 01/
01/90 00:09:54 00637 ssh: scp session from
::ffff:10.0.12.35 W 01/01/90
ssh: scp read error Bad file number, session aborted

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6120xgProcurve 6120 series

Table of Contents