Chapter 1 — Getting Started
16
a From the main menu, click the link corresponding to the WAP
master radio. The radio screen appears.
b In the Frequency field, choose the radio frequency of your wireless
network.
c (802.11a only) In the Allow Wireless Access Points field, choose
which service set, if any, you want other WAPs to connect to.
d In the Primary service set Node Type field, choose Master.
e In the Primary service set SSID (Network Name) field, type the
SSID that matches the SSID of the end device radios. In this
example, the SSID is Manufacturing.
f Click Submit Changes to save your changes.
5 Configure the access point to be a root access point. For help, see
"About the Primary LAN and the Root Access Point" on page 101.
6 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
MobileLAN access WA2X System Manual