Intermec WA21 System Manual page 100

Chapter 4 — Configuring the Radios
86
To configure the 802.11b radio
1 From the main menu, click 802.11b Radio. The 802.11b Radio screen
appears.
2 Configure the parameters for the radio. For help, see the next table.
3 Configure the advanced parameters for the radio. For help, see
"Configuring 802.11b Radio Advanced Parameters" on page 87.
4 (Master only) Configure inbound filters. For help, see "Configuring
802.11b Radio Inbound Filters" on page 89.
5 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
6 (Optional) Configure security by clicking Configure security settings
for this radio. For help, see Chapter 6, "Configuring Security."
802.11b Radio Parameter Descriptions
Parameter Explanation
Node Type Configure the 802.11b radio as a master or station. You can also
disable the radio.
SSID Enter the SSID (network name) for this radio. The SSID is case
(Network Name)
sensitive and cannot be blank or have more than 32 alphanumeric
characters.
802.11b radios communicate with other 802.11b radios with the
same SSID.
You need to assign the same SSID to the wireless end devices that
will communicate with this radio.
MobileLAN access WA2X System Manual