Intermec WA21 System Manual page 260

Chapter 9 — Additional Access Point Features
246
2 Click Stop Server to stop the TFTP server. Or click Start Server to
start the TFTP server.
You can also use the TFTP SERVER START and STOP commands,
described on page 236, to start and stop the TFTP server.
To automatically upgrade software (in a network with older access point software)
1 Click Upgrade software using automated software download. The
Automated Software Download screen appears.
2 In the Server IP Address field, type the IP address of an active TFTP
server from which the software download script file will be retrieved.
3 In the Script File Name field, type the name of a file on the TFTP
server that contains the commands that define the download process.
4 In the Start Time field, enter the time in the format dd:hh:mm:ss
(days:hours:minutes:seconds). When this timer expires, the access point
performs a TFTP get to read the script file from the server and begins
execution of the software download script.
5 In the Next Power Up Time field, enter the time in the format
dd:hh:mm:ss (days:hours:minutes:seconds). When this timer expires,
the access point will reboot, allowing the new firmware to take affect.
6 Click Start.
MobileLAN access WA2X System Manual