Intermec WA21 System Manual page 173

MobileLAN access WA2X System Manual
3 Click Submit Changes to save your changes. The screen changes,
depending on the security level you choose. For help, see one of the next
two screens.
4 Fill in the fields. For help, see "Configuring WPA – PSK Security" on
page 160 or "Configuring WPA – 802.1x Security" on page 161.
5 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
6 (WPA – 802.1x mode only) Configure the RADIUS server by clicking
Select a RADIUS server for 802.1x authentication. The RADIUS
Server List screen appears.
7 (WPA – 802.1x mode only) For each authentication server, enter the IP
address or DNS name, enter the shared secret key, port number, and
check the 802.1x check box.
Note: If you enter more than one authentication server, see page 137 for
a description of how the access point uses the servers.
8 (WPA – 802.1x mode only) Configure the database. Depending on the
authentication type, enter the information for each end device that is
allowed to communicate with the 802.1x network:
• In the EAS database, in the Type field choose the authentication type
and then enter the information for each end device. For help, see
Chapter 7, "Configuring the Embedded Authentication Server
(EAS)."
• For help configuring an external RADIUS server, see the
documentation that came with your server. You need to enter each
authenticator's IP address and the shared secret key. In the database,
you need to enter the information for each end device.
Chapter 6 — Configuring Security
159