Intermec WA21 System Manual page 153

MobileLAN access WA2X System Manual
All access methods are enabled by default. You may want to disable any of
these methods that you will not use to prevent access by an unauthorized
method.
To enable or disable access methods
1 From the main menu, click Security. The Security screen appears.
2 Enable or disable the access methods that users can use to connect to the
access point. For help, see the next table.
3 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
Security Parameter Descriptions
Parameter Description
Browser Access Determines if users can use a web browser to configure or
manage this access point. Browser access is through either port
80 or port 443.
Choose Secure-Only if you want to force users to log in using
the secure web browser (HTTPS) interface. Secure-only access
is through port 443.
Allow Telnet Access Determines if users can use a telnet session (or communications
(Port 23) program) to configure or manage this access point.
Do not clear this check box if you plan to configure the Telnet
Gateway and allow wireless clients to upgrade the access point
over the telnet port. For details, see page 216.
Allow SNMP Access Determines if users can use MobileLAN manager or another
(Port 161/162) SNMP management station to configure or manage this access
point.
Chapter 6 — Configuring Security
139