Intermec WA21 System Manual page 237

Purpose: Reboots the access point.
Syntax:
Purpose: Displays the flash file system directory, including information about the
Syntax:
Purpose: Finds the first executable file in the access point boot segment and tries to
Syntax:
Purpose: Downloads a file using Ymodem batch protocol into the flash segment
Syntax:
Purpose: Displays the manufacturing record for the access point. Use the MR
Syntax:
Purpose: Sets the baud rate of the access point.
Syntax:
MobileLAN access WA2X System Manual
B
B
FD
boot file.
FD
FR
run it; therefore, the first executable file in the access point boot segment
must be the boot file.
FR
FX
that is specified by .
s
FX s
where s is destination segment. You can use any number (1, 2, 3, or 4) to
specify the one flash memory segment on the WA2X.
MR
command to display the MAC address, configuration string, and serial
number for your access point.
MR
SR
SR z
where z is the baud rate. You must enter the baud rate as a whole number
with no commas. For example, to enter a baud rate of 19,200, you must
enter .
19200
You can also set the baud rate to autobaud, which lets the access point set
its baud rate to match the baud rate of your wireless end device. Type
and press Enter twice.
0
Chapter 9 — Additional Access Point Features
SR
223