Intermec WA21 System Manual page 171

MobileLAN access WA2X System Manual
4 Check the Verify CA Certificate check box and enter the
authentication server common names to verify that the access point is
connecting to the correct authentication server. Intermec recommends
that you perform this step because it provides another layer of security.
5 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
6 Repeat Steps 1 through 5 for each access point in your spanning tree.
All access points must have the same IAPP secret key to communicate
with each other.
In the access point that contains the master radio, click Maintenance > AP
Connections. The AP Connections screen lists the station radios
(including ones in other access points) that are communicating with the
master radio. For help, see "Viewing AP Connections" on page 183.
Spanning Tree Security–Authentication Method Descriptions
Parameter Description
Allow SWAP Determines if this access point authenticates to other access
points using SWAP.
Allow TLS If the authentication server offers the TLS protocol for the
authentication method, this check box determines if this access
point can use its server certificate to authenticate to the
network.
Allow TTLS If the authentication server offers the TTLS protocol for the
(MSCHAPv2) authentication method, this check box determines if this access
point uses a login to authenticate to the network. This login
must be in the authentication server database.
Preferred Protocol If TLS and TTLS are enabled, this field specifies which
protocol is sent to the authentication server when it sends an
unsupported protocol.
User Name Enter the user name of the access point when it uses TTLS to
authenticate to the network.
Password Enter the password of the access point when it uses TTLS to
authenticate to the network.
Verify CA Certificate Determines if you want to verify that the access point is
connected to the correct authentication server. The server
certificate signature is verified against the CA certificate and the
server common name is verified against the authentication
server common names that are configured in the access point.
Chapter 6 — Configuring Security
157