Intermec MobileLAN access WA21G Quick Start Manual

WA21G MobileLAN™access
Guide Start Quick
Government regulatory agencies require that this access point only use approved
antennas. Therefore, this access point uses a custom antenna connector. Do not use
antennas not approved for use with this access point.
The WA21G with the internal power supply option may be connected either to a
standard Ethernet port or to a powered Ethernet host that complies with the IEEE
802.3af specifi cation for power over Ethernet.
When the WA21G is connected to a powered Ethernet host, both the AC power cord
and the Ethernet cables must be disconnected prior to servicing.
reserved. rights All Corporation.
Technologies Intermec 2005
www.intermec.com
425.355.9551 fax
425.348.2600 tel
U.S.A.
98203 Washington Everett,
West Avenue 36th 6001
printed accessories,
available is manual This
the troubleshoot and
Here From
Safety First
Intermec's MobileLAN™access WA21G is the ideal enterprise-class access point for industrial
applications in harsh environments where cold temperatures, small airborne particles,
and moisture are prevalent. It provides the features necessary to support mission critical
applications.
The WA21G also has these features:
• Integrated power-over-Ethernet solution eliminates the need and expense of installing
separate cables and outlets for power and for Ethernet.
• Fiber optic solution enables wireless service on 100 Mbps networks.
• Advanced authorization, authentication, and encryption capabilities including WPA (PSK
and 802.1x) security, 802.1x security, and basic WEP 64/128 security.
This quick start guide helps you to understand the WA21G ports and LEDs. You can also
use this quick start guide to get an overview of how to install the WA21G, how to connect
the WA21G to power and to your network, and how to use the MobileLAN access Utility
to confi gure its IPv4 address. Once you assign the WA21G an IP address, you can continue
confi guring it using a web browser interface.
This product includes software developed by the OpenSSL Project for use in the Open SSL Toolkit (http://www.openssl.org).
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
A Rev 930-079-001
© *930-079-001*
Guide Start Quick WA21G access
representative. Intermec your contact CDs, or documentation,
order To 074080). (P/N CD AIT-III for Documentation the on
074921). (P/N Manual System WA2XG access MobileLAN the
maintain, gure, confi operate, install, to how on instructions complete
Go to Where
About the WA21G
The WA21G with an IEEE 802.11g radio installed is Wi-Fi certifi ed for
interoperability with other 802.11g and 802.11b wireless LAN devices.
P/N
pending. patents
MobileLAN
5,862,171; 5,844,893; 5,790,536;
5,574,979; 5,546,397; 5,504,746;
5,295,154; 5,070,536; 4,910,794;
non-condensing
158°F) to
32°F)
158°F) to
158°F) to
Hz 60 to 50 0.5A,
Hz 60 to 50
Hz 60 to 50 0.5A,
le fi PDF a as
see WA21G, in)
For cm 35.5

Specifications

AC power cord
(optional)
Document
package
Note: The WA21G does not ship with antennas. For a list of antennas and antenna
accessories, see the MobileLAN access WA2XG System Manual or contact your Intermec
representative.
foreign and U.S. other be may There 5,960,344. 5,940,771;
5,740,366; 5,696,903; 5,682,299; 5,680,633; 5,592,512;
5,483,676; 5,428,636; 5,425,051; 5,394,436; 5,349,678;
patents: following the of more or one by covered is Product
information Patent
90%, to 10 Humidity
(-40°F 70°C to -40°C temperature Storage
to (-22°F 0°C to -30°C only AC (optional),
bag Heater/insulated
(-22°F 70°C to -30°C only AC (optional), Heater
(-13°F 70°C to -25°C Standard
temperature Operating
IP54 rating Environmental
mA 315 48V, rating electrical
x
Ethernet over Power
V, 240 to ~200 or
1.0A, V, 120 to ~100 (optional) Heater
to 1.0 V, 240 to ~100 Standard
rating electrical AC
14.0 x in 9.3 x in (3.75
x cm 23.6 x cm 9.5 dimensions Physical
Out of the Box
MobileLAN
access WA21G