Page 2
The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service Intermec manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec.
This instruction sheet explains how to mount the rotating mounting bracket and then how to install the MobileLANaccess WA21 or the MobileLANaccess 2100 in the bracket. After you install the access point in the bracket, you can secure it with a lock to prevent unauthorized access.
Page 4
• Install the bolts and shoulder washers on the access point. • Secure the access point to the bracket. The instructions for each task are described in this section. Bracket support Mounting screw (8 places) MobileLAN access WA21/2100 Rotating Mounting Bracket Kit Instructions 21XXIS001.eps...
Page 5
3 Screw the hex bolts with washers into the holes uncovered by the removal of the rubber feet. 4 Tighten each bolt until the shoulder washer is pressed firmly into the access point chassis. MobileLAN access WA21/2100 Rotating Mounting Bracket Kit Instructions Shoulder washer (2 places) Hex bolt...
Page 6
10 Reattach all cables to the access point. 11 Reinstall the cable access door. 12 Rotate the bracket closed. Flat washer (2 places) Split lock Phillips screw washer (2 places) (2 places) MobileLAN access WA21/2100 Rotating Mounting Bracket Kit Instructions 21XXIS003.eps...
Page 7
Attention: Conformément à la Section 1 du Règlement 4-010 du Code canadien sur l'électricité, l'aptitude à utiliser un cordon flexible doit être déterminée par les services d'inspection locale ayant autorité dans ce domaine. MobileLAN access WA21/2100 Rotating Mounting Bracket Kit Instructions Rotating mounting bracket...
Page 8
Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 MobileLAN™access WA21/2100 Rotating Mounting Bracket Kit Instructions *069616-003* *069616-003*...