Intermec WA21 System Manual page 232

Chapter 9 — Additional Access Point Features
218
Telnet Gateway Screen Parameters (continued)
Parameter Description
Idle Time Enter the number of minutes that the gateway maintains the host
connection while a client is idle or disconnected. This timeout is
useful if the host does not have an inactivity timer. You can enter a
number from 1 to 255. However, this number must be greater than
the number of minutes set in the Lost Time field plus 11 minutes.
To disable the timeout, set it to zero. If you disable this timeout, the
gateway never ends the telnet session, regardless of how long the
client is idle or disconnected.
Lost Time Enter the number of minutes that the gateway maintains the host
connection while a client is disconnected. Values longer than Idle
Time serve no purpose. This timeout is useful because it provides a
shorter timeout for a client that has lost its connection than for an
idle client. You can enter a number from 1 to 255.
To disable the timeout, set it to zero. If you disable this timeout, the
gateway never ends the telnet session, regardless of how long the
client is disconnected.
Note that if the IP stack on the gateway cannot communicate with
the client for approximately 10 minutes, it will disconnect the client.
To manage the TGAP
• From the main menu, click Maintenance > Telnet Connections. This
read-only screen appears. For help, see the next table.
MobileLAN access WA2X System Manual