Intermec WA21 System Manual page 241

Purpose: Makes an inactive segment the active segment. Because the WA2X has
Syntax:
Example: These examples apply to non-WA2X products and are included for your
Purpose: Compacts the files in a particular segment.
Syntax:
Example: To compact the contents of the flash memory segment, enter:
MobileLAN access WA2X System Manual
FB
only one flash memory segment, this command has no affect on a WA2X.
This command is included here for backward compatibility with older
scripts only.
FB bootsegment (datasegment)
where:
bootsegment is the name or number of the boot segment to be activated.
datasegment is the optional name or number of the data segment to be
activated.
reference only.
To make segment 2 the active boot segment and segment 4 the active data
segment, enter:
FB 2 4
You can use an asterisk instead of a segment name if you want to leave that
segment unchanged. For example, to leave the active boot segment
unchanged and make segment 4 the active data segment, you could enter:
FB * 4
After loading software into the access point a common task is to activate
the new software. To activate the new software, enter:
FB IB: ID:
This command activates the inactive boot and data segments. You do not
need to know which of the boot and data segment numbers the flash is
loaded into.
FC
FC s
where s indicates the segment to be compacted. You can use any segment
number or name to specify the one flash memory segment on the WA2X.
FC 1
Chapter 9 — Additional Access Point Features
227