Intermec WA21 System Manual page 165

MobileLAN access WA2X System Manual
2 In the Security Level field, select Static WEP.
3 Click Submit Changes to save your changes. This screen appears.
4 Configure the parameters for WEP configuration. To ensure maximum
security, configure each WEP key with a different WEP code. For help,
see the next table.
5 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
WEP Security Parameter Descriptions
Parameter Explanation
Security Level Select Static WEP from the drop-down menu to use WEP
64/128/152 security.
WEP Transmit Key Determines which of the four WEP keys this access point uses
to transmit data.
WEP Key 1 For WEP 64, enter five ASCII characters or five hex pairs. For
WEP Key 2 WEP 128, enter 13 ASCII characters or hex pairs. For WEP
WEP Key 3 152, enter 16 ASCII characters or hex pairs.
WEP Key 4
To enter a hexadecimal key, prefix it with 0x. For example, the
ASCII key ABCDE is equivalent to 0x4142434445.
Chapter 6 — Configuring Security
151