Intermec WA21 System Manual page 208

Chapter 8 — Managing, Troubleshooting, and Upgrading Access Points
Alphabetized List of Configuration Error Messages
Configuration Error Message
A RADIUS entry in the RADIUS database has an IP address but no secret key
(password).
A RADIUS entry in the RADIUS database has a secret key (password) but no
IP address.
A RADIUS server entry points at this access point but the Embedded
Authentication Server is not enabled.
194
Note: The access point can only check its own configuration for possible
errors. It cannot check to see if the SSIDs, passwords, shared secret keys,
and other settings are all the same or compatible on other devices.
Screen Showing Possible Configuration Errors
To resolve possible configuration errors
1 Using your web browser, click Save/Discard Changes on the menu bar.
2 Review the error messages listed under the Possible Configuration
Errors heading.
3 Click each error message to jump to the configuration screen where you
can resolve the possible configuration error.
The configuration error messages are listed in the next table. Most are
self explanatory, but a few require additional information.
Additional Information
MobileLAN access WA2X System Manual