MobileLAN access WA2X System Manual
Chapter 7 — Configuring the Embedded Authentication Server (EAS)
To enable the EAS
1 Log in to the access point whose EAS you are enabling.
2 From the main menu, click Security > Embedded Authentication
Server. The Embedded Authentication Server screen appears.
3 Check the Enable Server check box.
4 Click Submit Changes to save your changes.
5 Configure the parameters. For help, see the next table.
6 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 33.
169