Intermec WA21 System Manual page 163

MobileLAN access WA2X System Manual
2 Check or clear the Enable GVRP for VLAN check box.
• Check the check box if the VLAN switch is configured to
dynamically configure its ports based on the end devices' needs.
• Clear the check box if the VLAN switch is statically configured to
always forward specific VLANs to specific ports.
3 Click Submit Changes to save your changes.
4 From the main menu, click Security. If you have enabled more than the
primary service set, you can configure each secondary service set for a
different VLAN.
5 Under the Security link, click the radio service set you want to
configure for the VLAN. This screen appears.
Chapter 6 — Configuring Security
149