Intermec MobileLAN access WA22G Quick Start Manual

WA22G MobileLAN™access
Guide Start Quick
Government regulatory agencies require that this access point only use approved
antennas. Therefore, this access point uses a custom antenna connector. Do not use
antennas that are not approved for use with this access point.
The WA22G is intended to be powered only from an Ethernet host that complies with
the IEEE 802.3af specifi cation for power over Ethernet.
Reserved Rights
Corp. Technologies Intermec 2004
www.intermec.com
U.S.A.
98203 WA Everett,
West Avenue 36th
printed accessories,
manual This 074921).
troubleshoot and
cations Specifi
Safety First
Intermec's MobileLAN™access WA22G is the ideal enterprise-class access point for light
industrial applications. It provides the features necessary to support mission critical
applications.
The WA22G also has these features:
•
Integrated power-over-Ethernet solution eliminates the need and expense of installing
separate cables and outlets for power and for Ethernet.
•
Fiber optic solution enables wireless service on 100 Mbps networks.
•
Advanced authorization, authentication, and encryption capabilities including WPA (PSK
and 802.1x) security, 802.1x security, and basic WEP 64/128 security.
This quick start guide helps you to understand the WA22G ports and LEDs. You can also
use this quick start guide to get an overview of how to install the WA22G, how to connect
the WA22G to power and to your network, and how to use the MobileLAN access Utility
to confi gure its IPv4 address. Once you assign the WA22G an IP address, you can continue
confi guring it using a web browser interface.
This product includes software developed by the OpenSSL Project for use in the Open SSL Toolkit (http://www.openssl.org).
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
All 074920-001
© *074920-001*
Guide Start Quick WA22G MobileLAN™access
6001
representative. Intermec your contact CDs, or documentation,
order To CD. AIT-III for Documentation the on le fi PDF a as
(P/N Manual System WA2XG access MobileLAN the see
maintain, gure, confi operate, install, to how on instructions complete
non-condensing humidity, relative 90% to 10 humidity:
158°F) to (-40°F 70°C to -40°C temperature:
131°F) to (-4°F 55°C to -20°C temperature:
cations Specifi Humidity and Temperature
mA 315 48V, x rating:
Ethernet
cations Specifi
lbs) (1.4 g 625
in) (6.3 cm 15.9
in) (1.5 cm 38.0
in) (9.8 cm 25.0
Dimensions
What Is the WA22G?
The WA22G with an IEEE 802.11g radio installed is Wi-Fi certifi ed for
interoperability with other 802.11g and 802.11b wireless LAN devices.
P/N
Intermec your contact or Manual System
antenna and antennas of list a
available is
WA22G access
WA22G, your
For
Storage
Storage
Operating
electrical
over Power
Electrical
Weight:
Width:
Height:
Length:
Physical
Box the of Out
Understanding the LEDs and Ports
Wireless #1
Flashes when a frame is
transmitted or received on
the radio port for the radio
installed in radio slot 1.
Power
Remains on after
the WA22G boots.
10BaseT/100BaseTX
Ethernet port
Fiber optic
port
Serial port
representative.
WA2XG access MobileLAN the see accessories,
For antennas. with ship not does WA22G The Note:
MobileLAN
package
Document
(4) screws
shoulder
and bracket
Mounting
Wireless #2
The WA22G does
Wired LAN
not use this LED.
Flashes when a
frame is transmitted
or received on the
Ethernet port.
Intermec Ready-toWork™
Indicator
Blue LED flashes if the WA22G is
searching for the root access
point in the network. Remains
on when the access point is
ready for use, indicating that it
either found a root or became
the root.