Packing The T4000 Router Components For Shipment - Juniper T4000 Hardware Manual

T4000 Router Hardware Guide
Related
Documentation

Packing the T4000 Router Components for Shipment

Related
Documentation
356
If you are using a mechanical lift, place the lift platform under the router, unscrew
and remove the mounting screws from the rack, and move the router to the shipping
crate.
If you are not using a mechanical lift:
If the router weight is fully supported by a shelf or another router, unscrew and
remove the mounting screws from the rack. Four people can then lift the router
and move it to the shipping crate.
If the router weight is not fully supported by a shelf or another router, four people
should grasp the router while another person unscrews and removes the mounting
screws from the rack. The lifters can then move the router to the shipping crate.
Place the router into the shipping crate or onto the pallet. If on a pallet, bolt the router
8.
to the pallet.
Cover the router with an ESD bag, and place packing foam on top of and around the
9.
router.
Replace the accessory box on top of the packing foam.
10.
Securely tape the box closed or place the crate cover over the router.
11.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
12.
ensure proper tracking.
Contacting Customer Support on page 353
Preventing T4000 Electrostatic Discharge Damage on page 296
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual boards in electrostatic bags.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
CAUTION: Do not stack any of the router components.
Contacting Customer Support on page 353
Displaying T4000 Component Serial Numbers on page 357
T4000 Component Serial Number Locations on page 358
Copyright © 2013, Juniper Networks, Inc.