T4000 Router Hardware Guide
284
Grasp both ejector handles, pull firmly, and slide the SIB about three-quarters of the
10.
way out of the chassis.
Place one hand underneath the SIB to support it, and slide it completely out of the
11.
chassis. Place it on the antistatic mat.
CAUTION:
Do not stack hardware components on one another after you
remove them. Place each component on an antistatic mat resting on a
stable, flat surface.
Figure 136: CXP Cable and Dust Cover
Figure 137: CXP Transceiver and Dust Cover
CXP transceiver
Figure 138: AOC Transceiver and Dust Cover
AOC switching plane cable
and transceiver
CXP transceiver
with dust cover
AOC switching plane cable
and transceiver with dust cover
Copyright © 2013, Juniper Networks, Inc.