Figure 100: Removing The Cip - Juniper T4000 Hardware Manual
Hide thumbs
Also See for T4000:
- Datasheet (4 pages) ,
- Hardware manual (468 pages) ,
- Quick start manual (40 pages)
Table of Contents
Advertisement
T4000 Router Hardware Guide
232
Loosen the captive screws at the top and bottom of the CIP faceplate.
3.
Grasp the handle on the CIP faceplate and carefully pull the CIP straight out of the
4.
chassis.
CAUTION:
Be sure to slide the CIP straight within the slot to avoid
damaging the connector pins on the front of the midplane.
Figure 100: Removing the CIP
Copyright © 2013, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
