Juniper T4000 Hardware Manual page 225

Copyright © 2013, Juniper Networks, Inc.
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
For detailed output for a specific FPC, specify a slot number (
user@host> show chassis fpc detail 5
Slot 5 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Verify that the FPC is properly seated in the midplane. Check that each ejector handle
3.
has been turned clockwise and is tight. Use a screwdriver to check that the screws
inside the ejector handles are tight.
Use the show chassis fabric fpcs
4.
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC #4
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #6
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
Chapter 18: Troubleshooting T4000 Router Hardware Components
2816 MB
1554 MB
10752 MB
2011-12-09 01:33:46 PST
1 day, 9 hours, 27 minutes, 12 seconds
Online
53 degrees C / 127 degrees F
2816 MB
1554 MB
10752 MB
2011-10-24 09:54:43 UTC
14 days, 19 hours, 58 minutes, 13 seconds
command to check the status of an FPC.
), which is optional:
5
201