Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
If applicable, tighten the screws on the extractor handles, by using a Phillips
7.
screwdriver. Be sure to tighten the screws enough to seat the Routing Engine properly.
Press the Routing Engine cover into place, then tighten the captive screws on the
8.
corners of the cover to secure it to the chassis (see
Figure 126: Installing a Routing Engine
Figure 127: Reinstalling the Routing Engine Cover
T4000 Host Subsystem Description on page 35
T4000 Routing Engine Description on page 39
T4000 RE-C1800 Routing Engine Description on page 40
T4000 RE-C1800 LEDs on page 41
Maintaining the T4000 Routing Engines on page 182
Chapter 19: Replacing T4000 Router Hardware Components
Figure 127 on page
269).
269