Installing A T4000 Six-Input Dc Power Supply Side Air Filter; Figure 122: Removing The Power Supply Side Air Filter; Figure 123: Installing The Power Supply Side Air Filter - Juniper T4000 Hardware Manual

Hide thumbs Also See for T4000:

Table of Contents

T4000 Router Hardware Guide

Installing a T4000 Six-Input DC Power Supply Side Air Filter

To install a six-input DC power supply side air filter element:

Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect

the strap to one of the ESD points on the chassis.

Install a new side filter element into the side air filter cover.

Insert the side air filter cover hooks into the rectangle holes in the sheet metal.

Slide the side air filter cover back into the power supply faceplate. The two lances

insert into the sheet metal.

Tighten the captive screw.