Table of Contents
Advertisement
XP
Change free scan time in scan mode.
The XP command is used to review and change the setting of free scan time when
in scan mode.
To review the current setting use the command XP[ ]
The response will be in the format:
XPnn where nn = 01 ~ 99 free scan time in seconds
nn = 00 free scan mode OFF
Examples are:
To change the current setting of free scan mode use the format XPnn[ ]
where:
nn = 01 ~ 99 free scan time in seconds
nn = 00 free scan mode OFF
For example, an input of XP15[ ] would activate free scan mode with a delay
time of 15 seconds.
Related commands BM ML XA XB XD XM XO XQ
XQ
Check the scan options (level & audio).
The XQ command is used to check the current setting of scan parameters.
Use the command XQ[ ]
The response will be
Related commands BM ML XA XB XD XM XO XP
XP52 = free scan time of 52 seconds
XP00 = free scan mode OFF
XQ0 = Not engaged
XQ1 = Level scan ON
XQ2 = Audio scan ON
SQ3 = BOTH level & audio scan ON
- 49 -
XP : XQ
Advertisement
Table of Contents
