Table of Contents
Advertisement
MC : MD
MC
Select monitor switch position.
The monitor switch may be selected irrespective of squelch setting by use of the
MC command. This is particularly useful for weak or fluttery signal monitoring or
when listening to SSB transmissions. The MC command may also be used to
mute the audio completely.
MCn[ ] where
n = 0 MUTE OFF (emit audio)
n = 1 MUTE ON (mute audio)
n = 2 MUTE AUTO (restore normal SQ operation)
MD
The MD command provides a quick method to report and change the current
receive mode without affecting other settings.
To report the current mode type:
MD[ ] where
0 = WFM
1 = NFM
2 = A M
3 = USB
4 = LSB
5 = C W
To change the current mode:
MDn[ ] where n equals 0 ~ 5
Multiple command entry is of course possible: AT0_MD3_RF145.2[ ]
Related commands AU MX RF SE VA VB
MD0[ ] WFM
MD1[ ] NFM
MD2[ ] A M
MD3[ ] USB
MD4[ ] LSB
MD5[ ] C W
- 24 -
Advertisement
Table of Contents
