AOR CU8232 Manual page 21

GR
Recall select scan channels.
The GR command is used to recall the data from select channels specifically or as
a whole.
Select scan channels are assigned in order 00 - 99. When a select scan channel
is deleted the higher numeric channel "shuffle down" to fill the vacant allocation
(refer to page 69 section 11 of the English language operating manual for further
information).
To recall the data from a specific select scan channel use the format:
GRnn[ ] where nn is the channel number 00 - 99
To recall the data from all select scan channels type GR[ ]
The response for a specific channel may look like this:
GR01_MXB07_MP0_RF0126000000 ST025000_MD2_AT0_TMTEST123
The information reported being:
Select scan:
Memory bank:
Memory channel:
Memory pass:
Receive Frequency:
Receive mode:
Attenuator:
Displayed text:
Related commands GA GS GR SM
Channel 01 (second registered channel)
B
07
OFF
126.00 MHz
AM
OFF
TEST123
- 21 -
GR