Explanation Of Commands - AOR CU8232 Manual

Explanation of commands : AT : AU

(10) Explanation of commands

AT
ATTENUATOR ON/OFF.
ATn[ ] n = 0 ATT OFF
n = 1 ATT ON
Multiple commands in conjunction with other commands are possible with a space
in between: AT, AU, MD, RF, ST, VA, VB.
Example: AU0_MD3_RF145.2_AT1[ ]
AT[ ] checks the current attenuator setting, the response being:
AT0 = ATT OFF
AT1 = ATT ON
Related commands MD MX RF SE VA VB
AU
AUTO MODE (and step) ON/OFF.
AUn[ ] n = 0 AUTO MODE OFF
n = 1 AUTO MODE ON
Multiple commands in conjunction with other commands are possible with a space
in between: AT, AU, MD, RF, ST, VA, VB.
Example: AU0_MD3_RF145.2[ ]
AU[ ] checks the current auto mode setting, this is not valid when "M.RE" or
"SCAN" is in use. The usual response to the AU request being:
AU0 = AUTO MODE OFF
AU1 = AUTO MODE ON - step size and receive mode set automatically.
Related commands MD MX RF SE ST VA VB
- 16 -