Table of Contents
Advertisement
EX : GA : GD
EX
End remote operation and restore keypad operation to AR8000.
To end RS232 remote operation type EX[ ]
This has the same effect as pressing the [LOCAL] key on the AR8000 receiver.
GA
Designate ("TAG") memory channel for select scan.
The GA command is used to "tag" memory channels for select scan.
GAxnn[ ]
where x is the bank letter A-J & a-j
where nn is the memory channel number 00-49
Related commands GD GR SM
GD
Deactivate ("UN-TAG") memory channel for select scan.
The GD command is used to remove "tags" from memory channels and remove
the frequency from the select scan list.
GDnn[ ] where nn is the select scan channel number 00-49
For example, to clear select scan channel 03 type GD03[ ]
When a select scan channel has been deleted, the registered memory channel
number will automatically be updated. Use the GR command to check the
updated registered channel number.
To clear all select scan channels in one go type GD%%[ ]
Related commands GA GR SM
- 20 -
Advertisement
Table of Contents
