AOR CU8232 Manual page 23

A typical response to the LM[ ] command is: LM1D
00 ~ 3F Squelch is open
80 ~ BF Squelch is closed
Related commands LC MG SG [UP] [DOWN]
MA
Recall data from the current of specified memory bank.
The MR command recalls data from the current of specified memory bank.
MR[ ] recalls data from the current memory bank.
MRx[ ] recalls data from the specified memory bank where
A typical response being:
MXA00_MP0_RF0000945000_ST009000_AU1_MD2_AT0_TMGEM AM
MXA01_MP0_RF0000693000_ST009000_AU1_MD1_AT0_TMRadio 5
SIMILAR FORMAT FOR ALL CHANNELS...
MXA49_MP0_RF0082520000_ST100000_AU1_MD1_AT0_TMJOAK-FM
The first memory channel data being:
Memory bank:
Memory channel:
Memory pass:
Receive frequency:
Step increment:
Auto mode:
Receive mode:
Attenuator:
Displayed text:
If no data is available in the selected or current memory bank the response may
look like this:
MXD_— No memory data in this channel of bank "D".
Related command MX
A
00
OFF
945 kHz (0.945 MHz)
9 kHz
ON
AM
OFF
GEM AM
- 23 -
LM : MA
x = A ~ j & a ~ j.