AOR CU8232 Manual page 15

SE Register the Search data.
SG Start the Search mode. Respond with freq and S-level reading
when SQ is open.
SI Switch the option unit ON/OFF (when fitted - not available in the
UK).
SL Write the start freq of Search.
SM Start the Select Scan.
SN Write the Pass Word. Recall the Pass Word.
SO Recall the Search operating mode.
SP Register the Free Search ON/OFF and delay time.
SQ Check the SQ setting.
SR Recall the Search data.
SS Start the Search.
ST Register the step size in search mode.
SU Register the end freq of search mode.
TI Register the interval time of Priority channel.
TM Write the text for memory channel
TT Write the text for search bank
VA Initiate the AVFO mode.
VB Initiate the BVFO mode.
VF Initiate the 2VFO mode.
XA Register the Audio Scan ON/OFF.
XB Register the Level Scan ON/OFF.
XD Register the delay time in Scan mode.
XM Register the Mode Scan ON/OFF.
XO Recall the Free Scan operating mode.
XP Register the Free Scan ON/OFF and timing.
XQ Recall the SQ operating mode.
Arrow Mark
[UP] [DOWN] similar to the receiver's keyboard.
- 15 -