AOR CU8232 Manual page 27

MR
Place the receiver in M.RE - memory read mode.
The MR command is used to place the receiver into memory read mode. The MR
command is also required before channels may be deleted using the MQ
command.
The MR[ ] command places the receiver in memory recall mode and the last
used channel data is reported.
It is possible to specify both the memory bank and channel number for recall:
MRxnn[ ] where
A typical response to the MR command may be:
MAC43_RF0435120000_ST20000_MD1_AT0_TMBANKC43
Memory bank:
Memory channel:
Receive frequency:
Step size:
Receive mode:
Attenuator:
Text:
A response of: MAD00_— indicates that the memory bank has no channels
programmed or they have been deleted.
Related command MA
x = memory bank A ~ J & a ~ j
nn = channel number 00 ~ 49
C
43
435.12 MHz
20 kHz
NFM
OFF
BANKC43
- 27 -
MR