Table of Contents
Advertisement
RX : SA
RX
Recall present operating condition and data.
The RX command is used to recall (generate a report) the current operating
condition of the receiver including VFO, SCAN, SEARCH etc along with receive
mode, frequency etc.
The format of the RX command is: RX[ ]
A two letter code reports the current operating condition with further details
(receiver frequency etc) following as appropriate. The meaning of the two letter
code is as follows:
DD. .
VF. .
MR. .
MS. .
SM. .
SS. .
Response examples are as follows:
VFO MODE
DD_RF0126000000)ST025000_MD2_AT0
2VFO MODE
VF_VA0128680000_ST025000_MD2_AT0
MEMO CH MODE (M.RE)
SCAN MODE
MS_MXB17_MP0_RF0197750000_ST025000_MD0_AT0_TMTV-8ch
SELECT SCAN MODE
SEARCH MODE
SS_RF0128800000_ST025000_AU1_MD2_AT0_TTAIR.VHF
Related command BN
SA
Audio search ON/OFF.
The SA command is used to report the current setting of audio search and to
change the setting between On and Off.
To recall the current setting type SA[ ]
The response will be SAn where:
VFO
2 VFO
MEMO CH
SCAN
SELECT SCAN
SEARCH
MR_MXB07_MP0_RF0126000000_ST025000_MD2_AT0_TMTest123
SM_MXA34_MP0_RF0028500000_ST000050_MD3_AT0_TM28m_HAM
- 34 -
MODE
MODE
MODE
MODE
MODE
MODE
n = 0 Audio search OFF
n = 1 Audio search ON
Advertisement
Table of Contents
