AOR CU8232 Manual page 32

PS : PW
PS
Write search PASS frequency.
There are 50 PASS frequencies allocated per search bank, they may be entered
using the PS command. The BN or SS commands must be used to choose the
bank prior to using the PS command.
PSnnnnnnnn00[ ] (Hz)
PSnnnn.nnn[ ] (MHz)
Examples of PASS frequency input:
150.2 MHz
1134 kHz
1691.0 MHz PS1691.[ ] or PS1691000000[ ]
Related commands BN PD PR PS SG SS
PW
Register current frequency as PASS.
The PW command is used to register the current receive frequency in the search
pass list. The BN or SS commands must be used to choose the bank prior to
using the PW command.
The command PW[ ] being used.
Related commands BN PD PR PS SG SS
enter PASS frequency in Hz
enter PASS frequency in MHz. If MHz entry is
used there is no need to enter the trailing digits
after the decimal point, they will be treated as "0".
PS150.2[ ] or PS150200000[ ]
PS1.134[ ] or PS1134000[ ]
- 32 -