AOR CU8232 Manual page 44

TM : TT
TM
Write text in conjunction with memory channel.
The TM command cannot be used on its' own but is used in conjunction with the
MX command to write text comments into a memory channel. Up to 7 ASCII
characters or characters from the table (below) may be entered. Blank table
entries [ ] represent a blank space. Please refer to the MX command for full
details of use.
TMxxxxxxx
Related commands MR MX
TT
Write text in conjunction with a search bank.
The TT command cannot be used on its' own but is used in conjunction with the
SE command to write text comments into a search bank. Up to 7 ASCII
Text write where xxxxxxx may be up to 7
characters in ASCII or character mode.
Entry is completed with a [ ]
- 44 -