AOR CU8232 Manual page 48

XM : XO
XM
Mode scan.
The XM command is used to check and set the options for MODE SCAN.
To check the current setting use the format: XM[ ]
The response will be:
To change the setting of mode scan use the format: XMn[ ]
where:
n = 0
n = 1
n = 2
n = 3
n = 4
n = 5
n = F
Related commands BM ML XA XB XD XO XP XQ
XO
Free scan ON / OFF.
The XO command is used to check the current setting of free scan mode.
To check the current status use the format XA[ ]
The response will be
Related commands BM ML XA XB XD XM XO XP XQ
XM0 = WFM
XM1 = NFM
XM2 = A M
XM3 = USB
XM4 = LSB
XM5 = C W
XMF = ALL MODE (effectively scan mode off)
WFM
NFM
A M
USB
LSB
C W
OFF - ALL MODES will be scanned.
XO0 = free scan OFF
XO1 = free scan ON
- 48 -