AOR CU8232 Manual page 40

SO : SP
SO
Check the search options (delay, free & hold).
The SO command is used to check the current setting of search parameters.
Use the command SO[ ]
The response will be
Related commands SA SB SD SP SQ BS BQ
SP
Free search mode On / Off.
The SP command is used to review and set the parameters of free search mode
including timing.
To review the current parameters use the format SP[ ]
The response will be SPnn
For example SP15 would represent free search ON and timing is 15 seconds.
To change the current setting of free search mode use the format SPnn[ ]
where
nn = 01 ~ 99 seconds free search time
nn = 00 free search OFF
For example SP52[ ] would switch free search mode ON with a timing of 52
seconds.
Related commands SA SB SD SO SQ BS BQ
SO0 = DELAY MODE ON
SO1 = FREE MODE ON
SO2 = HOLD MODE ON
where
nn = 01 ~ 99 seconds free search time
nn = 00 free search OFF
- 40 -