Configuring Access Control Rules; Configuring Additional Snmp Information - Cisco Small Business RV220W Administration Manual

Administering Your Cisco RV220W
Configuring Simple Network Management
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2
Cisco RV220W Administration Guide

Configuring Access Control Rules

The SNMP Access Control List is a table of access rules that enables read-only or
read-write access for select IP addresses in a defined SNMP agent's community.
To configure access control rules:
In the Access Control List Table, click Add.
Enter the IP Address of the specific SNMP manager or trap agent on which to
create an access rule.
Enter the subnet mask used to determine the list of allowed SNMP managers.
Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
Choose the access type. The SNMP manager or trap agent can either be allowed
to read and modify all SNMP accessible settings (rwcommunity) or be given read-
only access (rocommunity).
Click Save.

Configuring Additional SNMP Information

To configure additional SNMP information:
Choose Administration > Network Management > SNMP System Information. This
page displays the current SNMP configuration of the router. The following MIB
(Management Information Base) fields are displayed and can be modified:
• SysContact—Enter the name of the contact person for this router. Examples:
admin, John Doe.
• SysLocation—Enter the physical location of the router. Example: Rack #2,
4th Floor.
• SysName—(Read Only) A system name for easy identification of the router.
Click Save.
7
146