Configuring Routing; Configuring The Operating Mode - Cisco RV215W Administration Manual

Configuring Networking

Configuring Routing

STEP 1
STEP 2
STEP 3
STEP 4
Configuring Routing
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
In this case, to configure your device to be recognized by the ISP, clone the MAC
address of the WAN port to be the same as your computerMAC address.
To configure a MAC address clone:
Choose Networking > MAC Address Clone.
In the MAC Address Clone field, check Enable to enable MAC address cloning.
To set the MAC address of the device WAN port, do one of the following:
• To set the MAC address of the WAN port to your PC MAC address, click
Clone My PC's MAC.
• To specify a different MAC address, enter it in the MAC Address field.
Click Save.
Configure the routing options.

Configuring the Operating Mode

To configure the device operating mode:
Choose Networking > Routing.
In the Operating Mode field, select one of the following options:
Gateway (Recommended) Click this button to set the device
to act as a gateway.
Keep this default setting if the device is hosting
your network connection to the Internet and is
performing the routing functions.
6
47