Configuring L2Tp - Cisco RV120W Administration Manual

Configuring Networking
Configuring the WAN (Internet) Settings
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV120W Administration Guide
Enter MAC Address information. (See
Click Save.

Configuring L2TP

If you have a Layer 2 Tunneling Protocol (L2TP) connection to the Internet:
Choose Networking > WAN.
From the Internet Connection Type drop-down menu, choose L2TP.
Enter this information:
User Name
Password
Secret
Connection Type
Idle Time
My IP Address
Server IP Address
Enter MTU information. (See
Configuring the MAC Address, page
Enter your username assigned to you by the ISP.
Enter your password assigned to you by the ISP.
(Optional) Enter your secret phrase. This phrase is
known to you and your ISP for use in authenticating
your logon.
Choose the connection type:
• Keep connected—The Internet connection is
always on.
• Idle Time—The Internet connection is on
only when traffic is present. If the connection
is idle—that is, no traffic is occurring—the
connection is closed. You might want to
choose this option if your ISP charges based
on connection time.
If you choose Idle Time as the connection type,
enter the number of minutes after which the
connection terminates. The valid range is 5–999.
Enter the IP address assigned to you by your ISP.
Enter the IP address of the L2TP server.
Configuring MTU Settings, page
2
24.)
24.)
23