To Decode I 2 C Data; To Decode I2C Data - Agilent Technologies InfiniiVision 6000 Series User Manual

6 Displaying Data
To decode I
N O T E
N O T E
272
2
C data
Because of oscilloscope hardware resource limitations, you cannot
2
decode I C data while LIN triggering is selected.
2
For I C triggering setup see
To manually control Serial Decode on 6000L models start the
Remote Front Panel (see
Main Menu or press ctrl+A to access the oscilloscope's Acquire
Menu.
1 Select the I
a Press the Acquire key.
b Press the Serial Decode softkey.
Display Decode
decode mode
c In the Serial Decode Menu, press the Mode softkey.
d Use the Entry knob (or repeatedly press and release the
Mode softkey) to select the I
page 164.
page 44) and select Waveform from the
2
C serial decode mode:
Signal
setup menu
2
6000 Series Oscilloscope User's Guide
Return to
previous menu
C serial decode mode.