Connect To The Handheld Meter Logger Software; Figure 1-1 Agilent Handheld Meter Logger Software - Agilent Technologies U1452A User Manual

1 Introduction
Preparing Your Tester

Connect to the Handheld Meter Logger Software

You can use the IR communication link (IR communication port, located at
the rear panel) and the Agilent Handheld Meter Logger Software to
control your tester remotely, perform data logging operations, and transfer
the contents of your tester's memory to a PC.
Ensure that the Agilent logo on the U1173A IR- USB cable connected to
the tester is facing up. Firmly push the IR head into the tester's IR
communication port until it snaps into place.
Refer to the Agilent Handheld Meter Logger Software Help and Quick Start
Guide for more information on the IR communication link and the Agilent
Handheld Meter Logger Software.

Figure 1-1 Agilent Handheld Meter Logger Software

8 U1452A/U1452AT/U1451A User's Guide