Parallel Port Connection; Printer Driver - Xante ColourLaser 21 Series Setup Manual

14
Parallel Install: Windows
Drivers Supplied
The printer comes with two drivers: Adobe PostScript
and PCL. Both are supplied for the following systems:
• Windows 2000 Professional
• Windows Me, 98, 95
• Windows NT 4.0

Parallel Port Connection

Turn off both the computer and the printer.
Attach a standard IEEE-1284 parallel cable (not
supplied) to the parallel port on the printer (1),
securing it with the spring clips.
Attach the other end to the parallel port on the
computer (2) and secure it in place with the screws.
Parallel: Install the Software
©
Printer Drivers (Adobe PostScript, PCL)
©
On-Line XANTÉ ColourLaser 21 Series
User's Guide
• Minimum requirements: i486 processor, 16 MB
RAM, Microsoft Internet Explorer 4.0 or higher.
• Can also be viewed directly from the CD (click the
"View User's Guide" button in the Menu Installer
dialog box).
©
Color Swatch Utility
Provides a printout of color samples with RGB
settings. Use the settings in application software to
precisely match the sample color in print.
To Install the Software
Turn the computer on and wait for it to boot up.
Make sure that all software applications are closed.
Turn the printer on.
With the XANTÉ ColourLaser 21 CD in your
CD-ROM drive, click Start
Browse to your CD-ROM drive and double-click
install.exe in the root directory, then click OK.
!
For Windows 2000, the PostScript driver must be
®
installed through the Add Printer wizard (Start
Settings Printers
instructions; when appropriate, click Have Disk
and browse to \Drivers\Win2K\English\Psdrv\ on
the CD, selecting the inf file in that folder; at
"Digital Signature not Found," click Yes.)
Click the button beside Printer Software and follow
the on-screen instructions.
Exit the Menu Installer.
To View the User's Guide
®
®
Click Start Programs
Series ColourLaser 21 User's Guide.
To Open the Color Swatch Utility
®
®
Click Start Programs
Series Color Swatch Utility. (For more information
on the color utilities, see the on-line XANTÉ
ColourLaser 21 Series User's Guide).
Activate the Duplex Unit and
Internal Hard Drive in the

Printer Driver

See page 11 for instructions on how to do this.
®
Run.
®
Add Printer; follow
®
XANTÉ ColourLaser 21
®
XANTÉ ColourLaser 21
®
17