Wall Mounting The Electronic Telephone - Vodavi Starplus Triad 1/2/3 Installation Manual

Wall Mounting the Electronic Telephone

Wall Mounting the Electronic Telephone
All connections to the Electronic Key Telephone are fully modular. To wall
mount the Electronic Key Telephone, it is necessary to have one Wall
Mount Kit and one standard-type jack assembly designed for normal wall
hanging applications.
1. Unplug the line cord from the phone. This line cord is not be required
2. Lift the plastic number retainer upward and expose the screw
3. Be careful to position the tab so that the protrusion faces the
4. Substitute the short modular cord from the Wall Mount Assembly
5. Align the wall mount baseplate with holes on the bottom of the
6. Now match the two key hole slots on the baseplate with the lugs on
and should be retained as a maintenance replacement item.
underneath. Remove the screw and the handset tab. Replace it with
the handset tab from the Wall Mount Kit.
hookswitch. This allows the handset to remain secure when the
telephone is on the wall. Replace the screw and snap the number
retainer into place.
into the modular connector vacated by the line cord.
telephone. Snap in place.
the 630-A type jack. Align the modular connector and slide telephone
into place. Refer toFigure 2-33.
2-73