3-92
Programming the KSU
I/O Ports
1. To verify the programming for the I/O ports, press **3226, Flash 15.
2. Select the desired I/O port, Button 1, 3, 4 (MPB, SIU1, SIU2).
3. Dial [5] on the dialpad and press HOLD.
CO Lines
1. To verify the programming for the CO Lines, press **3226, Flash 40.
2. Enter CO line Range for the Caller ID Unit and press HOLD.
3. Press Button 21 (Page C).
4. Press Button 2, Ring Delay Timer.
5. Enter 04 (minimum). Press HOLD.
6. Reset the system and the CTI box.
CO LINES
ICLID
ICLID
Interface
Interface
Unit
Unit
RS232
STARPL US
KSU
RS232
LAN
SE RVER
Figure 3-35: CTI System Configuration
Caller ID Interface Unit Installation
CT I
M odule
CTI
M odule
CTI
M odule
LAN
LAN
L AN
LAN