Mounting The Expansion Ksu (Eksu) - Vodavi Starplus Triad 1/2/3 Installation Manual

2-14

Mounting the Expansion KSU (EKSU)

The Expansion KSU is a metal housing designed for wall mount
installation. If required, an EKSU is mounted on the right side of the BKSU.
1. Before mounting the Expansion KSU, remove the KSU
2. Mount the Expansion KSU on the screws and tighten the screws
3. Mount the 2 side brackets between the Basic and Expansion KSUs.
4. Remove the front cover by turning the two front cover screws
5. Tilt and lift the cover to remove.
6. Interconnection is achieved via a amphenol type connector. No cable
Figure 2-7: Expansion KSU Back w/Mounting Plate Extended
Interconnection Cover on the right side of the Basic KSU.
securely.
counter clockwise.
is used to connect the BKSU and the EKSU together. Refer to
Figure 2-8.
KSU and Power Supply (PS) Installation