Vodavi Starplus Triad 1/2/3 Installation Manual page 181

3-78
Installing the DTMF-A Unit
The DTMF-A unit has 4 DTMF receivers installed on it. This board can be
installed on the SLIB and T1IB boards. The DTMF-A mounts on the SLIB
board as a daughter board type arrangement.
1. Unpack the DTMF-A Module from its anti-static conductive bag in the
2. Locate the CONN5 and CONN6 connectors on the DTMF-A module.
3. Locate the CONN5, and CONN6 connectors on the SLIB (outlined).
4. Position the DTMF-A module so that the CONN5 and CONN6
5. Push the DTMF-A module onto these connectors making sure it is
Refer to
DTMF-A Module.
packing box.
connectors match up with the CONN5 and CONN6 connectors on the
SLIB respectively.
seated properly.
Figure 3-27. This completes the installation procedure for the
Station Connections