Dss Led/Button Test - Vodavi Starplus Triad 1/2/3 Installation Manual

5-6
2. Press the dial pad keys to display an LCD message that indicates
3. Test LEDs independently of the Keys by pressing the flex LED button.

DSS LED/Button Test

When the DSS test is selected and a DSS test is invoked, ALL DSS units
associated with the keyset are placed in the test mode.
If no DSS unit is associated with the keyset, the keyset display indicates
NO DSS. The DSS LED test causes all the LEDs to light steady. All LEDs
remain lit steady until a DSS flex button is depressed. Pressing a DSS
button turns on the DSS button LED and displays an LCD message on the
associated keyset identifying the DSS button number (01 to 48). In
addition, it turns off the previously selected flex LED.
Conditions
Test mode interrupts the normal operation of a keyset or DSS.
which digit was pressed.
Depressing the H-T-P switch from one position to another displays
one the following words: H_POS, T_POS, or P_POS.
P RE SS D SS B U T TON S
P RE SS D SS B U T TON S
B TN 01
<-- - -- - -- - -
<- -- - -- - -- -
Keyset Self Test