Power Line Surge Protection; Lightning Protection; Ksu Ac Power Plug - Vodavi Starplus Triad 1/2/3 Installation Manual

Power Line Surge Protection

Power Line Surge Protection
The AC outlet should be equipped with an additional power line
transient surge protection device. Systems using such devices are more
resistant to damage from power line surges than unprotected systems.
Power line surges often occur during switching operations and especially
during violent thunderstorm activity.
Installation of a surge protector meeting the specifications described in
the follow paragraph prevents or minimizes the damage resulting from
power line surges.
The isolation transformer/surge protector shall be a 15 amp self
contained unit that plugs into a standard grounded 117 VAC wall outlet.
The wall outlet must be designed to accept a 3-prong plug (2 parallel
blades and ground pin). The protector should be fast operating and
capable of protecting transients greater than 200 volts.

Lightning Protection

The system provides secondary protection per UL 1459 Specifications.
Primary protection circuitry is the installers responsibility and should be
installed per the National Electric Code (NEC).

KSU AC Power Plug

Before plugging the KSU power cord into the AC source, verify that the
Power switch on the AC/DC front panel is off.
Plug the KSU power cord into the AC outlet and turn the AC/DC Power
switch on. The red/green LED on the PSUs should illuminate.
It is recommended that the AC outlet be equipped with an isolation
transformer/surge protection device that utilized MOV protection.
2-21